No matching pages. Try "pallet", "mezzanine" or "cantilever".
No matching pages. Try "pallet", "mezzanine" or "cantilever".
From heavy palletized racking built for international shipping hubs to automated shuttle systems engineered for North African supply chains, our structural steel equipment meets stringent FEM 10.2.02, EN 15512, and Algerian RPA 99 seismic standards.
High-bay automated stacker crane racking integrated with WMS/WCS software. Engineered for multi-deep high-throughput pharmaceutical and food distribution centers in Algiers and Boumerdès.
Corrosion-resistant AISI 304/201 stainless steel modular shelving. Built specifically for sterile pharmaceutical laboratories in Sidi Abdellah and cold-room food processing in Mitidja.
Gravity roller beds with magnetic speed retarders ensuring seamless First-In, First-Out (FIFO) stock turnover for beverage bottlers, dairy producers, and perishable distribution in Sétif.
Semi-automated deep lane shuttle cart storage that minimizes forklift aisle travel. Ideal for chemical manufacturing plants in Skikda and deep-freeze logistics in Mostaganem.
Heavy structural steel mezzanine platforms doubling or tripling floor area without building extensions. Engineered for port bonded zones and spare parts warehouses in Oran.
100% direct access selective racking constructed from cold-rolled Q355B structural steel. Complete beam-level adjustability for fast-moving retail and 3PL distribution centers in Rouïba.
Heavy-gauge boltless shelving for hand-loaded industrial hardware, carton storage, and automotive maintenance spare parts depots in Constantine and Oued Smar.
Turnkey shuttle racking with continuous rail channels, laser sensors, and PLC remote control. Designed to achieve up to 85% volumetric warehouse utilization in high-cost logistics zones.
Algeria's rapid economic diversification under the National Industrial Development Strategy has created distinct warehousing demands across coastal ports, inland industrial parks, and southern extractive zones.
Home to Algeria's most dense concentration of consumer goods distribution, commercial food manufacturing, and third-party logistics (3PL). Here, industrial real estate commands high lease costs, necessitating maximum vertical cubic utilization. Our high-bay selective racking and multi-tier mezzanine floors allow distribution operators to scale storage capacity upward inside existing building envelopes without costly land acquisition.
Centered around Arzew, Bethioua, and the Port of Oran, the western maritime corridor demands rugged industrial storage capable of withstanding humid, salt-laden marine air. We supply heavy-duty structural steel cantilever systems and corrosion-proof powder-coated pallet racks engineered specifically for chemical plants, polymer resin storage, and automotive supply assembly lines.
The agricultural capital of Algeria requires unbroken refrigerated supply chains for citrus fruit, dairy, and meat processing. Operating in sub-zero environments demands steel grades that resist cold-induced brittleness. Our radio shuttle storage and gravity roller racks operate reliably at temperatures down to -25°C, providing dense storage with zero exhaust emissions inside walk-in freezers.
Algeria's domestic pharmaceutical self-sufficiency policy has established Sidi Abdellah as a premier biopharma center. Storage installations must satisfy strict Good Manufacturing Practices (GMP) and Algerian Ministry of Health cleanliness criteria. We provide electropolished stainless steel racks and smooth-surfaced modular racking with anti-microbial epoxy coatings that prevent dust accumulation.
Supporting Sonatrach and oilfield service contractors in desert conditions requires extreme load tolerances and resistance to abrasive sandstorms. We engineer extra-heavy-duty cantilever and drive-in racks that accommodate oversized drill pipes, hydraulic valves, valves, and heavy mining machinery components with unit loadings exceeding 3,000 kg per beam level.
Serving as the distribution gateway between eastern Algeria and the high plateaus, wholesalers in Sétif handle massive volumes of plastics, consumer electronics, and dry goods. High-throughput selective racking systems with customized mesh decking and heavy upright crash guards ensure maximum stock turnover speed and damage-free forklift operations.
Algeria's logistics landscape is undergoing an unprecedented structural transformation. Driven by the new Investment Law (Loi n° 22-18 relative à l'investissement) and ambitious import-substitution mandates, domestic manufacturing output has surged by over 18% in pharmaceuticals, construction materials, and processed food sectors.
Consequently, traditional floor stacking and uncertified local light racking can no longer support modern operational requirements. Warehouses across the national territory are experiencing three major structural shifts:
Maximum floor volume recovery achieved via high-density shuttle racking systems.
Certified standard heavy-duty beam loading capacity for heavy industrial pallets.
Hot-rolled prime carbon steel profiles delivering superior tensile and seismic yield strength.
Comprehensive compliance documentation for seamless Algerian customs clearance and bank domiciliation.
Industrial racks are load-bearing steel structures. In northern Algeria, structural design must account for significant seismic acceleration along the Tellian tectonic fault zone, combined with marine corrosion along the 1,600 km Mediterranean coastline.
| Racking Classification | Structural Steel Grade | Surface Treatment | Seismic Rating (RPA 99) | Optimal Handling Equipment | Target Sector in Algeria |
|---|---|---|---|---|---|
| Selective Pallet Racking | Q235B / Q355B Cold-Rolled | Epoxy-Polyester Powder (70-90µm) | Zone I, IIa, IIb Compliant | Counterbalance, Reach Truck | FMCG Distribution, Logistics Corridors |
| Radio Shuttle Cart Racking | High-Yield Structural Q355B | Baked Hybrid Polymer Coating | Zone IIb & III Reinforced | Standard Forklift + Automated Cart | Beverage, Dairy & Cold Storage (-25°C) |
| Heavy Duty Drive-In System | High-Grade Micro-Alloy Steel | Hot-Dip Galvanized / Powder Coated | Engineered Top Portal Bracing | Drive-in Narrow Forklift | Raw Agricultural & Seasonal Bulk Goods |
| Industrial Multi-Tier Mezzanine | Hot-Rolled I-Beam / Q235B Cold Floor | Anti-Skid Zinc Phosphate + Enamel | Calculated Dynamic Load Frame | Pedestrian Stacker, Freight Hoist | Automotive Spares, E-Commerce, O&G Parts |
| Automated AS/RS High-Bay | Precision Welded High-Tensile Steel | Automated Electrostatic Coating | Zone III Comprehensive Dampening | Fully Automated Stacker Crane | Pharmaceutical Hubs & Bonded Terminals |
| Cantilever Rack for Long Loads | H-Section Structural I-Beam | Heavy-Duty Industrial Epoxy | Free-Standing Heavy Base Anchor | Side Loader, Overhead Crane | Steel Rebar, PVC Extrusions, Timber Stock |
Northern wilayas—including Algiers, Chlef, Boumerdès, Tipaza, and Blida—fall under high-seismic Risk Zones IIb and III. We conduct structural computer modeling calculating fundamental vibration periods, second-order (P-Delta) effects, and dynamic base shears to guarantee that beam connectors and upright baseplates maintain structural equilibrium during ground tremors.
Humidity and sea-salt aerosol in coastal industrial zones like Djendjen, Skikda, and Ghazaouet rapidly attack inferior untreated steel. Our components undergo an 8-stage pre-treatment wash including zinc-phosphating, followed by electrostatic deposition of thermosetting polyester powder cured at 200°C, delivering salt-spray resistance exceeding 500 hours according to ASTM B117 standards.
Our upright columns feature an optimized 11-fold omega cross-section cold-rolled with extreme dimensional precision. Beam-to-column connections utilize heavy-duty 5-hook claw connectors with safety locking pins that resist vertical dislodgment forces exceeding 5,000 N, protecting operations against forklift operator impacts.
Essential legal, commercial, and engineering guidelines for warehouse managers, supply chain directors, and procurement officers importing industrial storage racks into Algeria.
Importing industrial steel equipment into Algeria requires strict compliance with the Algerian Ministry of Commerce and Customs Directorate (Douane Algérienne). Standard clearance documentation includes the commercial invoice, detailed packing list specifying net and gross weights per bundle, Certificate of Origin (Certificat d'Origine), Bill of Lading (Connaissement Maritime B/L), and critically, the Certificate of Free Marketing in the Country of Origin (Certificat de Libre Pratique) along with the Certificate of Conformity (Certificat de Contrôle de Qualité). Prior to shipment, the buyer must ensure bank domiciliation (Domiciliation Bancaire) via an accredited Algerian commercial bank (such as BEA, BNA, CPA, or international institutions like Société Générale Algérie) pursuant to current foreign exchange and import control directives.
Under Algerian technical building codes (DTR-BC 2.48 / RPA 99 version 2003), storage racks are categorized as structural steel frames supporting elevated live loads. Depending on whether your facility is located in Zone 0 (negligible risk in the deep south), Zone I (low risk), Zone IIa/IIb (moderate to high risk in Algiers, Blida, Tipaza, and Boumerdès), or Zone III (very high risk in Chlef), we adjust the structural configuration. This includes engineering thicker column baseplates, installing heavy-duty horizontal and vertical spine bracings, utilizing M16/M20 chemical concrete expansion anchors, and running structural finite-element dynamic response spectra simulations to certify safety against overturning.
In alignment with Algerian Central Bank (Banque d'Algérie) foreign trade regulations, we fully support Irrevocable Letters of Credit (Crédit Documentaire / Credoc) and Documentary Remittances (Remise Documentaire). Our trade finance team works closely with your opening bank to ensure that all proforma invoices, Harmonized System (HS) codes (typically HS Code 7308.90 for industrial steel structures and racking), shipping marks, and inspection clauses are perfectly aligned to avoid payment delays or administrative discrepancies at the port of entry.
We routinely ship 40ft High Cube (HC) and 40ft Open Top (OT) containers to all major commercial ports along the Algerian coast. Primary maritime destinations include Port d'Alger (for central wilayas and the Mitidja plain), Port d'Oran (for western automotive and petrochemical zones), Port de Djendjen / Jijel (ideal for heavy bulk shipments and eastern high plateaus), Port de Skikda, and Port de Bejaia. We package all upright frames and beams with protective air-bubble film, strapping bands, and corner protectors to ensure zero maritime moisture damage during Mediterranean transit.
Yes. We offer complete technical turnkey support. In addition to delivering detailed bilingual (French and English) CAD layout drawings, assembly diagrams, and structural calculation notes (Notes de Calcul), we deploy experienced installation supervisors to your warehouse site anywhere in Algeria. Our engineers supervise local erection teams, verify vertical plumb tolerances in accordance with European EN 15620 standards, supervise torque wrench anchoring to the concrete floor slab, and affix official load warning plaques (Plaques de Charge) prior to system commissioning.
For standard selective pallet racks with upright frame loads up to 10,000 kg, a reinforced concrete floor slab with a minimum thickness of 150 mm to 200 mm and a compressive cylinder strength of at least C20/25 (or 25 MPa) is required. For high-density systems, drive-in racking, or multi-tier mezzanine columns exerting point loads exceeding 40 kN, we recommend a slab thickness of 200 mm to 250 mm (grade C25/30) with double mesh rebar reinforcement. We provide footplate point-load calculations so your civil structural engineer can verify slab punching shear capacity.
As a global manufacturer with dedicated supply capabilities for the North African territory, we combine world-class automated fabrication facilities with meticulous field knowledge of Algerian logistical realities.
Share your warehouse dimensions, pallet unit weights, and material handling truck specifications. Our application engineers will calculate load requirements, draft an optimized CAD layout, and provide a competitive CIF / CFR Algiers or Oran quotation within 48 hours.